Finished knitted gingerbread house with decorated roof, walls, and chimney

Knitted Gingerbread House Pattern – Free Festive Knitting Pattern

Create a festive holiday decoration with our free knitted gingerbread house pattern! Cozy, charming, and fun to make. Click through to start stitching today!

Knitted Gingerbread House Pattern – Free Holiday DIY Craft

Finished knitted gingerbread house with decorated roof, walls, and chimney

This incredible knitted gingerbread house Pattern is the ultimate festive knitting project! Every surface is covered with hand-knitted panels and decorated with tiny knitted sweets, a snowman, a Christmas tree, and even a chimney for Father Christmas. The roof hinges open so you can use it to store decorations or fill it with real sweets — making it as practical as it is adorable.

The house measures about 13 × 17 cm and stands 20 cm tall (roughly 5 × 6½” and 8″ tall). The structure is built from plastic canvas covered with knitting, so it’s sturdy and holds its shape beautifully. This pattern by Frankie Brown covers building the house itself — the 20 decoration patterns are separate.

Close-up of the front of the knitted gingerbread house with door and windows

What You’ll Need

Plastic Canvas

  • 1 sheet of ultra-stiff plastic canvas — approx. 34 × 55 cm (13½ × 21½”), 7 holes per inch. This is sometimes sold as “extra large plastic canvas”. Getting the right size and stiffness is important.

Yarn

  • 80g ginger DK yarn — for walls, base and end walls (Frankie used Stylecraft Special DK in Camel)
  • 40g cream DK yarn — for the roof (Frankie used Stylecraft Special DK in Cream)

Needles

  • 3.25mm / US size 3 straight needles (main needles)
  • 2.75mm / US size 2 straight needles
  • 3.25mm double pointed needles
  • One 6mm / US size 10 needle (yes, just one!)

Other Supplies

  • Sewing thread in ginger, cream, dark green and black
  • 3 thin pipe cleaners (15cm / 6″) for stiffening decorations
  • Beads and buttons for decorations (see full materials list below)
  • Tapestry needle for sewing up

💡 Tension is everything in this project. Each knitted piece must fit its plastic canvas panel. Check your tension before you start and change needle size if needed.

Abbreviations

  • K — knit
  • P — purl
  • K2tog — knit two stitches together (decrease)
  • sl 1 / sl 1 kwise — slip one stitch knitwise
  • psso — pass slipped stitch over
  • st / sts — stitch / stitches

Step 1 – Cut the Plastic Canvas

Plastic canvas pieces cut out to form the gingerbread house structure

Cut 7 pieces from your plastic canvas sheet. Count bars carefully and cut just after the last bar:

  • Base: 35 × 35 bars — cut 1
  • Side Walls: 28 × 24 bars — cut 2
  • End Walls: 38 × 43 bars — cut 2
  • Roof Panels: 28 × 26 bars — cut 2

Shaping the end walls: The top of each end wall needs a pointed peak. Mark the middle of one short side (between bars 14 and 15), then draw lines from this point down to bar 24 from the other end. Cut along these lines to create the gable peak.

📌 Tip: Trim all sharp right-angle corners from your plastic pieces — they tend to poke through the knitting if left sharp.

Step 2 – Knit the Base

Yarn: Ginger DK  |  Needles: 3.25mm  |  Tension: 12 sts and 17 rows = 5cm / 2″

Stitch: Stocking stitch

  1. Using the long tail cast-on, cast on 30 stitches.
  2. Work 33 rows in stocking stitch, starting with a purl row.
  3. Cast off.
  4. Knit two pieces like this.
  5. Oversew the two pieces together around three sides, insert the plastic canvas base, then close the last side.

💡 Making two pieces and joining them over the canvas reduces bulk at the edges and gives a much neater finish.

Step 3 – Knit the Side Walls

Knitted moss stitch wall panels for the gingerbread house in ginger yarn

Yarn: Ginger DK  |  Needles: 3.25mm  |  Tension: 12 sts and 25 rows = 5cm / 2″ in moss stitch

Stitch: Moss stitch (US: seed stitch) — every row: K1, *P1, K1, repeat from * to end

  1. Using the long tail cast-on, cast on 31 stitches.
  2. Work 41 rows in moss stitch.
  3. Cast off.
  4. Knit four pieces total (two for each side wall) and join them over the plastic canvas panels.

Step 4 – Knit the End Walls

Gingerbread house walls assembled and joined together

Yarn: Ginger DK  |  Needles: 3.25mm

Stitch: Moss stitch, same as side walls

  1. Using the long tail cast-on, cast on 25 stitches.
  2. Work 41 rows in moss stitch.

Now shape the gable peak:

  • Row 1: K1, *P1, K1, rep to last 2 sts, K2tog
  • Row 2: K2, *P1, K1, rep to last 2 sts, K2tog
  • Row 3: K1, *K1, P1, rep to last 2 sts, K2tog
  • Row 4: *K1, P1, rep to last 2 sts, K2tog

Repeat these 4 rows 5 times — you’ll have 5 stitches left.

  • Next row: K1, P1, K1, K2tog — 4 sts
  • Next row: K2, K2tog — 3 sts
  • Cast off using double decrease: sl 1 kwise, K2tog, psso.

Knit four pieces total (two per end wall) and join over the canvas.

Once all four walls and the base are covered, sew them together: hold pieces wrong sides facing, oversew firmly with ginger yarn. Join all four walls to the base first, then sew the corner seams.

Step 5 – Knit the Roof Panels

Cream stocking stitch roof panels being sewn onto the plastic canvas

Yarn: Cream DK  |  Needles: 3.25mm  |  Tension: 12 sts and 17 rows = 5cm / 2″

Stitch: Stocking stitch

  1. Using the long tail cast-on, cast on 40 stitches.
  2. Work 31 rows in stocking stitch, starting with a purl row.
  3. Cast off.
  4. Knit four pieces total — two per roof panel. Join each pair over the canvas.
  5. Join the two roof panels along one long edge (this becomes the roof ridge).

📌 Leave the roof separate from the house for now — it’s much easier to sew the wall decorations on before attaching the roof!

Step 6 – Knit the Roof Ridge

Roof ridge and chimney detail on the finished knitted gingerbread house

The roof ridge covers the join at the top of the roof and gives it that classic gingerbread house look. It uses a mix of knit and purl rows — a row counter will help.

Yarn: Cream DK  |  Needles: 3.25mm

  1. Using the long tail cast-on, cast on 40 stitches.
  2. Work the following row sequence:
  • Row 1: Knit
  • Row 2: Purl
  • Rows 3–5: Knit
  • Row 6: Purl
  • Rows 7–8: Knit
  • Row 9: Purl
  • Row 10: Knit
  • Row 11: Purl
  • Rows 12–13: Knit
  • Row 14: Purl
  • Rows 15–17: Knit
  • Row 18: Purl
  • Row 19: Knit

Cast off knitwise.

Place the roof on the house and pin the ridge along the top. Sew it down with small running stitches just above the cast-on and cast-off edges. Sew the ends down to the roof, and join the loose section at the top with a short vertical seam.

Step 7 – Add Decorations

Close-up of knitted decorations including snowman and Christmas tree
Side view of the knitted gingerbread house with festive decorations

Once the house is assembled, the real fun begins! The walls are decorated with an array of knitted treats — sweets, a snowman, a Christmas tree, candy canes, and more. The roof is lined with knitted sweets along the snowy ridge.

Knitted gingerbread ornaments and decorations for the house

There are 20 separate decoration patterns and 4 gingerbread ornament patterns to go with this house. Each decoration is knitted separately and sewn onto the house. The ornaments can be stored inside the hinged roof cavity — or fill it with real sweets for a child-friendly version!

Key decorations include:

  • 🍬 Knitted sweets along the roof line
  • ⛄ A tiny snowman between the windows
  • 🎄 A miniature Christmas tree
  • 🏠 A knitted chimney (for Father Christmas, of course!)
  • 🎪 A front porch made from plastic canvas and knitting

Full Materials List

Yarn Colours (Stylecraft Special DK / Sirdar Country Style DK)

  • Ginger / Camel (main house colour)
  • Cream (roof)
  • Spring Green / Bottle Green (Christmas tree)
  • Pomegranate / Lipstick (red sweets)
  • Saffron / Amber (yellow decorations)
  • Fondant / Village Green (pastel decorations)
  • Walnut / Chocolate (dark brown accents)
  • Small amount of blue 4-ply for the snowman’s scarf

Sewing Thread

  • Ginger (to match house)
  • Cream (to match roof)
  • Dark green (for tree)
  • Black (for snowman features)

Notions

  • 3 thin pipe cleaners (15cm / 6″) for shaping
  • 3 × 4mm black seed beads (snowman buttons)
  • Assorted festive “Dress It Up” buttons — gingerbread people, cookies, primary colours, Christmas garland
  • Pony beads in red and green (if stringing ornaments)
  • 20mm and 15mm curtain rings (for hanging ornaments)

Tips for Success

  • Check tension before you start — every panel must fit its canvas piece. Adjust needle size until your tension matches.
  • Trim sharp corners off all plastic canvas pieces before covering with knitting.
  • Make two knitted pieces for each canvas panel and join them over the canvas — this reduces bulk and gives neater edges.
  • Decorate the walls before attaching the roof — much easier to work on flat surfaces.
  • Use a row counter for the roof ridge — the mix of knit and purl rows is easy to lose track of.
  • Pin decorations in place before sewing to check the arrangement looks right.
  • The hinged roof can store real sweets — a great surprise for children!

Frequently Asked Questions

Where do I find ultra-stiff plastic canvas?

Look for “extra large ultra stiff plastic canvas, 7 holes per inch” at craft shops or online (Amazon, eBay, or specialist needlecraft stores). The size you need is approximately 34 × 55 cm (13½ × 21½”).

Do I need all 20 decoration patterns?

No — you can decorate as simply or as elaborately as you like. Even with just a few decorations the house looks wonderful. The 20 patterns are separate downloads if you want the full effect.

Can I use different yarn brands?

Yes, as long as you use a standard DK weight. The key is getting the tension right — knit a tension square and adjust your needle size before starting.

How long does this project take?

The house structure itself takes a weekend or two. If you add all the decorations, it’s a longer project — but deeply satisfying. Many knitters make it over several weeks leading up to Christmas.

Conclusion

Bringing a festive holiday keepsake to life with yarn and needles is a wonderfully cozy and rewarding project. This knitted gingerbread house adds a charming, rustic touch to your winter decor and makes a delightful handmade gift for loved ones. Grab your favorite yarn and needles to start crafting your own holiday display today. Click through to explore more wonderful crochet dress ideas and inspiring patterns to keep your handmade journey going!

Similar Posts

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *